This equipment covers one main crank and two side shafts. Due to the
special bearing design, it is smoother in operation as compared to the
traditional
Nail Making Machine. The main axle is
directly driven by the motor. In addition, the two side shafts
separately used to control the nail cutter part and nail mold part are
pulled via four bevel gears.
Specifications
| Max Wire Diameter S.W.G. (m.m.) |
2.65mm - 4.06mm, 12g - 6g |
| Max Length |
25mm - 125mm, 1" - 5" |
| Max Speed (Nails/Minutes) |
300 |
| Power Required H.P. |
5 |
| Case Size (cms) |
160 x 115 x 115 |
A wire nail having a head and a shank
integral with the head, the shank being formed with a tip and having an
axis, and the head having a circumferential edge defining a complete
circle; characterized in that the centre of the head is radically offset
from the axis of the shank.
The wire on the wire wheel will be fed to
the working center through the wire roller of the
nail making machine,
and then the nail head is formed via the stamping of the punch pin after
the nail mold clamps the wire tightly. After loosened by the nail mold,
the wire will be driven to cutting center through the side shaft.
Later, the nail will be cut into the set length. Finally, the finished
nails will be automatically ejected through the ejector.
Our New Develop High Speed Low Noise
Automatic Nail Making Machine adopts plunger and oil pipe lubricating structure so as to
ensure the features such as high speed, low noise and less impact.
Especially, it can make the high quality of nails and other special
nails with certain accessories. The assortment of our products is
complete. We will supply various machine parts and necessary fine
auxiliaries for you.
